Synthetic & Cotton Spun Yarn Testing

Our extensive assortment of Mini Tens (R-048) is widely utilized for supervising the functioning of various texturizing machines and other yarn processing machines. These portable and compact electronic yarn testers are available with a memory capacity of upto 500 measuring positions each of which is processed statistically.

 

Other details:

• Measuring range 0.5-500 cN digital display
• Budget priced tensionmeter for quick (spot-)measurements
• Exchangeable measuring heads
• Exchangeable 9-Volt battery (battery life approx. 2 years)
• digital read-out ( 3 ½ digits) in cN / pond / gram
•  integrated “HOLD” position for freezing the last measured yarn tension
• mechanical overload protection up to 300%
• rotating measuring head ( 90° )
• selfthreading yarn guides
• maximum yarn deflection during measurement only 0.1 mm
• free yarn length for yarn measurements 15 mm
• signal output 0 – 1 volt
• power supply: 9 volt battery –life span apprgox 18 months or 80 000 measurments
• precision 1/- 3 %
• built-in calibration weights 10 and 50 cN
• measuring head protection against accidental drops, overload or false manipulation
• protective and stand-by case

• Production Capacity: On order
• Delivery Time: 1-2 Months
• Packaging Details: Overseas Shipping

With assistance from highly qualified and experienced professionals, we are engaged in offering a huge amount of Electronic Tension Meter. This product is manufactured using high grade basic material and cutting edge technology at vendor’s end. Further, these tension meters are stringently checked under the supervision of our quality controllers on various quality parameters set by the industry. In order to fulfill variegated demands of clients, this product is made available in customized options.

Features:

• Industry approved design
• Easy threading in the running material
• Direct read-out of the measured tension
• Solid aluminium-housing
• Overload protection: 500%
• Threading elements:                             a) Standard: equipped with rollers, running in precise ball-bearings
  for material speeds up to max. 1200 m/min
  b) equipped with fixed, ceramic thread guides, no limit for the material-speed
• Calibration: factory calibrated, can be done and controlled at any time, by the customer himself
• Meas. Error: < 3% - in measuring-range from 0 up to the calibration-point.
• Power supply: 9 V battery, type 6LR61, battery control by lamp. Operating time approx. 75 hours with an alkaline battery

Additional Information:

Production Capacity: On order

Delivery Time: 1-2 Months

Packaging Details: Overseas Packaging

Twist Tester, to determine yarn twist in single or plied yarns, is a quadrant type with auto stop & reverse for conventional or untwist/re-twist methods.
Twist tester offers adjustable test length up to 500 mm / 20 inches for S & Z twist yarns, and inching function helps operator to get an esteemed twist quickly. Test result in TPI / TPM is
directly displayed on the touch screen.
Standards: ISO 2061, ASTM D1422/1423, BS 2085, DIN 53832, IWTO 25-70

• Production Capacity: On Order
• Delivery Time: 2-3 Months
• Packaging Details: Overseas Packing

Yarn Board (Board Winder), used to assess the evenness,  hairiness, neps and other imperfections in a representative sample of yarn wound at a pre-determined pitch onto a tapered black yarn board.
Standards: ASTM 2255, GB 9996

• Production Capacity: On Order
• Delivery Time: 2-3 Months
• Packaging Details: Overseas Packing

Hand-held Textile Moisture Meter, is widely used in leather materials, fabrics, garments, yarn, axis, cheese, textiles and other industries that need rapid determination of moisture (moisture regain).

Features
a) Textile moisture meter using high-frequency theory, LCD digital display, the probe and the host all in one
b) Position the probe against the surface to be measured, determine moisture quickly within one second
c) Measure accurately and without any damaging on the surface to be measured
d) Small size, light Weight that can be portable for on-site rapid testing

Additional Information:

Production Capacity: On order

Delivery Time: 2-3 Months

Packaging Details: Overseas Shipping

Wrap Reel, is to produce skeins of yarn of a pre-determined length and number of turns for count and strength testing. 1 Meter, 36" or 54" circumference collapsible swift (specify). Wrap reel is completed with yarn package stand and pre-tension device, and fitted with pre-determined counter.
Standards:
ISO 2060, ASTM D1907/2260, BS 2010, DIN 53830, GB/T4743, GB/T14343, GB/T6838

• Production Capacity: On order
• Delivery Time: 1-2 Months
• Packaging Details: Overseas Packing

Priced at the most reasonable rate possible, the offered Fully Automatic Yarn Tester is known to be highly appreciatd and asked for in the world widemarket. In addition, the offered product is known to offer superior performance, commendable service life and high resistance to corrosion.
The most important properties of yarns are tensile strength and elongation, mass unevenness, and yarn count (linear density). Static tensile tests, yarn evenness tests, as well as various methods of yarn count testing, e.g. by means of wrap reel and balance, serve for the assessment of these yarn properties. The operation of different test equipment to which the yarn samples are presented one after another, results in high expenditure of labour and, especially in case of modern automatic computer-controlled testing equipment, in considerable financial investment.

Tensile:Using the high clamping force of the pneumatic jaws for tensile tests up to force 1000 N, the long path of the draw-off clamp for breaking extensions up to 1000 % with draw-off speed 1...10,000 mm/min - highest in the world, the quick yarn threading reducing idle time between successive tests to only a few seconds. According to ISO 2062 or ASTM D2256, D885 CRE principle.

Evenness:A new innovative capacitor system enables capacitive testing of the mass unevenness according to ISO 16549 within a wide yarn count range by individual adaptation of the measuring sensor to the properties of the yarn material with test speed upto 500 m/min and automatic yarn feeding device. Measurable variables delivered by the system are the coefficient of variation of the mass distribution along the yarn length, the spectrogram, and for staple fibre spun yarns the numbers of neps, thick and thin places.

Count:In this test, e.g. according to ISO 2060 or ASTM D6587, a preselected yarn length, e.g. 100 m, is delivered by the yarn feeding device into a collection chamber, and subsequently the weight is measured. By using the principle of a vacuum conveyer the yarn is permanently in contact with the ambient (laboratory) climate. In this way drying of the yarn as would occur with a compressed-air system does not happen. Yarn length selectable in the range 1...1000 m, max. test speed 500 m/min with yarn feeding device.

Standard version with 24 positions (expandable to 48 on request), free selection of package changer positions to be tested in succession.

Features:

• Easy operations
• Commendable service life
• Superior performance

• Production Capacity: On order
• Delivery Time: 6-8 Months
• Packaging Details: Overseas Packing

The RK frictionmeter is a device which determines the coefficient of friction µ.device is used to examine the influence of different preparations on the running characteristics of POY, yarns, filaments, wires or other flexible materials or to check the surface structure of thread guides and friction elements.
Options:
- Friction factor measurement on heated ceramic and steel friction body.
- Stick-slip measurement (static friction measurement) @ 1mm/min

Working Principle:A test specimen (thread or thin wire) is drawn over a friction body at a defined wrapping angle and a defined speed. During this operation the tensile force on the test thread is measured before and after the friction body. An increase in the tensile force (thread tension) is a measure of the coefficient of friction µ. The coefficient of friction µ is determined very simply with the RK-WIN software

Possibilities:
- Yarn (or wire) against a solid body such as ceramic or metal. The wrapping angle of the test specimen around the friction body of 90°, 180°, 270° or 360° Any form of friction body can be used. Round friction bodies with diameters between 2 mm and 60 mm.
- Yarn against Yarn. In measuring the thread/thread friction factor the thread is wrapped around itself so that it forms a friction body at the contact points. The number of wraps is digitally displayed.

• Production Capacity: On Order
• Delivery Time: 3-4 Months
• Packaging Details: Overseas Packing

We hold immense expertise in distributing, trading & supplying a broad range of Automatic Tensile Tester with fully motorised and software. These instruments are used for different sample forms and force measurement up to 2.5KN. Our product is manufactured making use of premier-grade raw material and advanced technology at vendor’s end. Owing to its corrosion resistance as well as superior finish features, the offered product is highly demanded in the market. Apart from this, clients can avail the entire range at nominal prices within given span of time.

Features:

Fully Servo driven Software with data back up and graphical reprenstative and Pneumatic Grip. Follows ASTM D 2256, ASTM D 4034, ASTM D 1578, BS 1932-2, BS 4674, BS EN ISO 2062, ISO 6939, etc.

• Production Capacity: On order
• Delivery Time: 3-4 Months
• Packaging Details: Overseas packaging

By keeping track of current market development, we are offering an excellent range of Friction Meter. These meters are used for measuring the friction coefficient of yarns, tapes against friction bodies like ceramic, steel and stick. Our vendor’s professionals manufacture the offered meters utilizing utmost grade raw material and high-end technology. Apart from this, our quality controllers perform a series of testing procedures at every stage of production to eradicate any possible defect from. Clients can avail the entire meters from us in multiple specifications as per their requirements. Works as per ASTM D3412, ASTM D3018.

The following measurements are possible:
- yarn/ceramic friction
- yarn/steel friction
- yarn/yarn friction
- stick/slip measurements (static friction)

 
Specifications:

• For yarns, glass fibers 20-5000 Deniers
• Data evaluation and graphs on PC
• Static and dynamic friction measurements (0.001-1000 m / min)
• Stick / slip measurements
• Easy to operate-accurate measurements
• Automatic zeroing and calibration of measuring heads
• Button for setting wrap angles ( 90 - 6 x 360 °)
• Measuring range : friction μ 0 – 1, 0 - 0.33, 0 - 0.166
• Tensions heads 0.02 - 20 000 cN

• Production Capacity: On Order
• Delivery Time: 4-5 Months
• Packaging Details: Overseas Packing