Excel Electro Industries And Leasing Pvt Ltd

Lab Pad Steam Range, a combination of padding mangle and steamer, is used to carry out all pad steam processes with saturated steam, offering the shortest time 4 seconds between padder and steaming chamber, to avoid the disturbances and perform very good stability & repeatability on sulphur & vat dyestuff.Pad steam range consists of padding mangle with two padding rollers, and a steaming chamber with fabric holding capacity of 6m, temperature range 98 ~ 100 ??? for a dwell time 20 ~ 120 seconds. The steam generator is offered on request.
Specifications
Horizontal padder-
Roller size Dia. 125 mm x 300 mm
Made of NBR rubber with 70o +/- 3 shore hardness
Pressure 0.1 ~ 0.5mPa, 2 pressure gauges
Chemical trough capacity 500 ml

Steamer-Steam Max 0.5mPa
Steaming Max 6 m, speed control 20 ~ 120 s adjustable inside the steaming chamber
All guide rollers inside the chamber is Teflon-coated
Water sealing bath at the outlet for automatic cooling control Both steam inlet pipe and water inlet pipe size 1/2 inch are supplied by users
The steamer should be ordered additionally

Lab Padder, padding mangle is used for dyeing, finishing and impregnating. The roller of Lab padder is made of quality NBR; good flexibility ensures long-life; whole machine is made of high- quality stainless steel.

Specifications:
Working Width: 420 mm
The Dia. of Roller: Φ130 mm
Shore hardness: 70o
Working Speed: 0-30rpm (Adjustable)
Pressure of air: 0.1~0.6MPa
Padding Rate: 40%~80%

Infrared Lab Dyeing Machine is suitable for all fibers and substrates’ dyeing. The infrared dyeing system produces accurate laboratory sample dyeings with level and reproducible results and accommodates up to 24 positions with a low liquor ratio for synthetic and natural fibers. This infrared dyeing system moves the beakers in a circular rotation with advanced infrared heating technology eliminating glycol contamination and cumbersome beaker cleaning.
For the accurate dyeing, after the temp. reaches 80degree, it is required to add assistant into the beaker in a long period, and most IR dyers is adding liquid by using injector, but it is too fast. While TD130 is different, by adding liquid into the auxiliary beaker on top of the cap, and the liquid is kept adding to the main beaker very slowly through the tiny hole of cap. This device is to simulate the actual dying process that the pump adding assistant slowly, and this Chemical Adding kits is offered on request.
Features Three ~ dimensional turning, clockwise and anti-clockwise running makes even dyeing results.
Beakers are made of quality SUS304stainless steel, heating fast and level, specially pressure-tested beakers offer maximum safety for atmospheric and high-temperature dyeing.
Infrared heating continuously (non-off-type) by quality infrared heaters which 360-degreering-shape, direct heating on steel beakers, to let dyeing equably and saving 50% electricity. 


Specifications
Temperature range 30 ~ 140 oC ??? Beakers 24 pots / 300 ml (or other No. of quantity and volume)
Heating or cooling speed 0.5 ~ 3.5oC /min ??? Temp. Control accuracy 1oC .
Rotation speed 0 ~ 30rpm (adjustable)
Liquor Ratio 1: 5 ~ 1:10

Lab Wringer (Padder), is to evenly squeeze or extract excess liquid from fabric specimens for next procedure of test. This Lab padder / wriner is used for many kinds of textile test to precisely ensure the rest liquid of specimens.


Specifications :
Working width 300 mm
Rollers Dia. 54mm, made of neoprene
Working speed 25 mm/s (9rpm)
Dead weight loading up to 4.76 kg
Equipped with liquor tank

Lab High Temperature Steamer,is the same looking as the table type dryer, this steamer can bewidelyusedfordrying,curingandsteaming,fortheuseofawiderangeofthedyestuffand chemical industry,finishing plants, research institutes and general textile industry.

SpecificationsTemperature range for: Electric heating for drying, curing 20 deg Cel ~ 220deg Cel Steaming with saturated steam 103 deg Cel
High Temperature Steaming at 130~ 180 deg Cel
Working time is presetable for 1 ~ 999 s, automatically moving in & out, and alarms
Special design of retractable pin frame, the tension of test fabric samples can be adjusted in both warp and weft direction, the maximum stretch rate are up to 30%
Max sample size 360 x 420
Suitable for the discontinuous operation in conjunction with TD122 Lab Padder
The steamer should be ordered additionally

Laboratory Tenter, a flexible continuous pin chain type hot air dryer, is widely used for all where a certain sample length is required in a continuous process. This mini-tenter is designed to simulate the Features of production scale tenter..


Features:
Batch working with pin frame (length and width are adjustable) 170 ~ 400 mm
Continuous working with endless pin chain
The electric heating power is 19kw,temperature 20~ 220 deg CelMovingspeed 0.5m/min - 1.7m/min 3 sets of air circulating fan ensure high drying and thermosoling performance
Equipped with cloth pressing wheel in the feeding side, and pin-up device to lead fabric to reserve box at the end.

Lab Mini-dryer, table model, is an excellent laboratory dryer for all drying, setting, baking and thermosoling processes.This dryer is used for the next procedure of TD400. Floor type dryer (looking is the same as TD610)is offered.
Specifications
Good heat insulation obtained by high grade material, construction with well dimensioned insulation thickness
Specially designed pin frame to hold all types of sample fabric in length and/or width
Sample size up to max. 36x 42 cm
Automatic pin frame transport with pre-selectable dwell times Heating temperature up to 250oC
Audible alarm for end of test
Even temperature distribution by the air circulation fan
Suitable for the discontinuous operation in conjunction with TD122 Lab Padder